Enforcer G Series loudspeaker systems are complete, self-contained, coaxial, bass-reflex speaker systems. These high output packages are an all-metal constitution. Utilizing a unique and effective cooling system called Air Gap Technology (AGT), which transfers heat from the gap to maintain top performance even under extreme demand conditions. |
The G4 is enclosed in an all aluminum bezel assembly with fully mounted metal sealed back can leaving no plastic or ABS parts. The enclosure has removable non-fiberglass damping material inside and white powder coat paint on the outside and comes complete with t-bar supports. Wiring terminations are enclosed in a rear compartment utilizing a smart connect plug, wire restraint, and removable cover plate for ease of installation. |
 |
   |
|
The G6 is enclosed in an all aluminum bezel assembly with fully mounted
metal sealed back can leaving no plastic or ABS parts. The enclosure
has removable non-fiberglass damping material inside and white powder
coat paint on the outside and comes complete with t-bar supports.
Wiring terminations are enclosed in a rear compartment utilizing a |
|
 
|
The G8 offers three optional pattern control
horns allowing full system design. The High frequency horn flares
simply screw into the 1” compression driver. Flares available
are 120°, 60° & 120° X 60° (Asymmetric). These
high output packages utilize a unique and effective cooling system
called Air Gap Technology (AGT). As well as Embedded High Frequency
(EHF). With AGT the basket containing the motor structure is cast
aluminum. A series of precision holes found in the aluminum cast basket act as heat transfer points that pull heat from the gap, this is an effective way of maintaining top performance even under extreme demands. With EHF the high output 1” compression driver is built into the motor structure of the eight inch driver minimizing the space taken within the tuned housing as well as unitizing on the on the AGT cooling effect and aliening the two drivers at a single point source. The G8 offers both of these technologies in a package consisting of a driver pack having an injected PP & Mica, Cone Woofer and 1” embedded (EHF) Compression Driver, the G-Series also utilizes a built-in 70 Volt transformer that offers a variable tap selection switch and a transformer by-pass (selectable by removing the front grill) |
|
   |
Description Enforcer G Series Loudspeaker is a completely self-contained, bass-reflex speaker system. This high output package utilizes a unique and effective cooling system known as Air Gap Technology (AGT). The basket of this ceiling subwoofer is cast aluminum, which sets it above the typical, stamped metal basket commonly found in the housing of inferior speakers. A series of precision holes machined in the aluminum basket act as heat transfer points, actively pulling heat from the gap. This, coupled with the space between the cone and the spider, allows the speaker to maintain maximum performance even under extremely demanding conditions. |
|
|
G Series Mounting Hardware To make this product even more contractor friendly, there is an option of ordering the back plate on its own (G6IP input plate for G6). These can be installed along with the connector. The G6 speaker can then be easily installed at a later date. Included with each pair and ships complete. |
|
  |
Description The G-POD is a completely self-contained coaxial, bass-reflex speaker system. Ideal for indoor or outdoor use, the G-POD is excellent in applications that require background music as well as high quality paging for announcements. This high output package utilizes a unique and effective cooling system known as Air Gap Technology (AGT).
|
|
|
| Home | Contact Us | Products | Distributor | Trade Shows |
Copyright Enforcer 2005. All Right Reserved.